Brocade Communications Systems RFS6000 System Reference Manual page 551

3. Ensure the Adopt unconfigured radios automatically option is NOT selected.
4. Select Network > Wireless LANs from the controller main menu tree.
5. Select the target WLAN you would like to use for AAP support from those displayed and click
6. Select the Independent Mode (AAP Only) checkbox.
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01
When disabled, there is no automatic adoption of non-configured radios on the network.
Additionally, default radio settings will NOT be applied to Access Points when automatically
adopted.
NOTE
For IPSec deployments, refer to
Independent WLAN and take note of the CLI commands in red and associated comments in
green.
Any WLAN configured on the controller becomes an extended WLAN by default for an AAP.
the Edit button.
Selecting the checkbox designates the WLAN as independent and prevents traffic from being
forwarded to the controller. Independent WLANs behave like WLANs as used on a a standalone
Access Point. Leave this option unselected (as is by default) to keep this WLAN an extended
WLAN (a typical centralized WLAN created on the controller).
Establishing Basic Adaptive AP Connectivity
Sample Controller Configuration File for IPSec and
A
537