Brocade Communications Systems RFS6000 System Reference Manual page 378

6
Configuring firewalls and access control lists
3. Click on the Wireless Filters tab.
4. The Wireless Filters tab contains the following read-only information:
5. If the properties of an existing filter fulfill to your needs but still require modification to better
364
Client-ACL Index
Displays a numerical identifier used to associate a particular ACL to a range of
MAC addresses (or a single MAC address) that are either allowed or denied access
to the controller managed network.
Starting MAC Displays the beginning MAC Address (for this specific Index) either allowed or
denied access to the controller managed network.
Ending MAC
Displays the ending MAC Address (for this specific Index) either allowed or denied
access to the controller managed network.
Zone ID Displays a Zone ID associated with each Wireless Filter. Zone ID can be between 1
and 48.
zone. All members of the same zone will have the same firewall
policies applied to them.
Allow/Deny States whether this particular ACL Index and MAC address range has been allowed
or denied access to the controller managed network.
WLANs
Displays the WLANs associated with each Wireless Filter.
filter devices, select the Edit button. For more information see,
"Editing an existing wireless filter"
Zones allows you to associate firewall policies to each
on page 365.
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01