Configuring Ap Adoption Defaults - Brocade Communications Systems RFS6000 System Reference Manual

Configuring AP adoption defaults

The Configuration tab displays the current radio adoption configuration including radio type,
placement, channel setting and power settings. Many of these settings can be modified (as well as
radio's current rate settings) by selecting a radio and clicking the Edit button. These settings are
the default configurations when the radios are set to auto-adopt.
To view existing Radio Configuration information:
1. Select Network > Access Point Adoption Defaults from the main menu tree.
2. Click the Configuration tab.
3. Refer to the following information as displayed within the Configuration tab:
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01
Type Displays whether the radio is an 802.11a radio or an 802.11 bg model radio
Placement Displays the default placement when an radio auto-adopts and takes on the
default settings. Options include Indoor or Outdoor. Default is Indoor.
Channel Displays the default channel when an radio auto-adopts and takes on the default
settings. This value can be a specific channel, Random, or ACS. Random assigns
each radio a random channel. ACS (Automatic Channel Selection) allows the
controller to systematically assign the channel. Default is random.
Viewing Access Point adoption defaults
4
217