Brocade Communications Systems RFS6000 System Reference Manual page 176

4
Viewing and configuring controller WLANs
8. To delete a list configuration for a device, select a row from the List Configuration field and
Adding an exclude list to the WLAN
To exclude a device from a WLAN:
1. Select Network > Wireless LANs from the main menu tree.
2. Select the NAC Exclude tab to view NAC exclude devices.
3. Click on the Add button in the Exclude Lists field.
4. Enter the name of the device that you wish to exclude for NAC authentication.
5. Refer to the Status field. It displays the current state of the requests made from the applet.
6. Click OK to save and add the new configuration and close the dialog window.
7.
Configuring devices on the exclude list
To add more than one device for a particular type of device in the include list:
1. Select Network > Wireless LANs from the main menu tree.
2. Select the NAC Exclude tab to view and configure all the NAC exclude devices.
3. Click on the Add button in the List Configuration field.
162
click the Delete button.
Requests are any "SET/GET" operation from the applet. The Status field displays error
messages if something goes wrong in the transaction between the applet and the controller.
Click Cancel to close the dialog without committing updates to the running configuration.
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01