1. Select Security > Wireless Intrusion Detection from the main tree menu.
2. Click the Configuration tab.
3. Click the Enable WIDS checkbox to enable the Wireless Intrusion Detection System (WIDS)
4. Within the Collection Settings field, set the Detection Window interval (in seconds) the
5. Refer to the Violation Parameters field to define threshold values that trigger an alarm:
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01
application.
controller uses to scan for Client violations. The available range is from 5 - 300 seconds.
Violation Type
Displays the name of the violation for which threshold values are set
in the Client, radio and controller columns.
Trigger Against (Auth,
Displays what conditions will trigger the violation parameter against Authorized
APs, Unauthorized APs and Ignored APs. If a violation is triggered by an AP type it
Unauth, Ignore)
will display with a green check box. If it is not triggered on an AP type it will display
with a red X.
Threshold Values for
Set the Client threshold value for each violation type. If exceeded, the Client will be
filtered and displayed within the Filtered Clients screen.
Wireless
Client intrusion detection
6
345