Brocade Communications Systems RFS6000 System Reference Manual page 255

6. To edit the details of an AP firmware image, highlight an AP image type and click the Edit
7.
Adding a new AP Firmware image
To add AP Firmware Image settings:
1. Select Network Setup > Access Point from the main menu tree.
2. Click the AP Firmware tab.
3. Click the Add button to display a screen to configure the AP Image Type and AP Image File.
4. Specify the AP Image Type.
5. Specify the AP Image File. You can browse the controller file systems using the browser icon.
6. Click the OK button to save the changes and return to the AP Firmware tab.
Editing an existing AP Firmware image
To modify the AP Firmware Image settings:
1. Select Network Setup > Access Point from the main menu tree.
2. Click the AP Firmware tab.
3. Select an AP Image Type from the AP Image Upload table.
4. Click the Edit button to display a screen to change the AP Image Type or AP Image File.
5. Modify the AP Image Type as necessary.
6. Modify the AP Image File as necessary. You can browse the controller file systems using the
7.
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01
button. For information on adding a new AP firmware refer to
image" on page 241.
To delete an existing AP firmware image, highlight an AP image type and click the Delete
button.
AP images must be on the flash, system, nvram or usb file systems in order for them to be
selected.
browser icon. AP images must be on the flash, system, nvram or usb file systems in order for
them to be selected.
Click the OK button to save the changes and return to the AP Firmware tab.
Configuring Access Points
"Editing an existing AP Firmware
4
241