Brocade Communications Systems RFS6000 System Reference Manual page 270

Provides centralized wireless lan (wlan) configuration and management

Hide thumbs Also See for RFS6000:

Table of Contents

IGMP snooping

The IGMP Snoop Config tab displays the following information:

Snoop Enable

Select to enable IGMP Snooping on the controller. If disabled, snooping on a per

VLAN basis is also disabled.

Unknown Multicast

Select to enable the controller to forward Multicast packets from unregistered

Multicast Groups. If disabled, Unknown Multicast Forward on a per VLAN basis is

also disabled.

Click to Apply changes made to the running configuration.

Revert back to previous state from the running configuration.

The VLAN index on which IGMP Snooping is enabled.

Snoop Enable

The status of IGMP Snooping. Disabled for the selected VLAN if the screen displays

a red cross mark.

Unknown Multicast

The status of forwarding IGMP Multicast packets from unregistered Multicast

Groups. Disabled for selected VLAN if the screen displays a red cross mark.

Learning Mode

Indicates how the controller learns IGMP Snooping information. Can be one of

pimDvmrp or static.

Multicast Router Ports

Lists the ports used for Multicast Routing. Can be one of the available ge ports.

Brocade Mobility RFS6000 and RFS7000 System Reference Guide

53-1001858-01