Brocade Communications Systems RFS6000 System Reference Manual page 351

5. Click the Apply button to save the changes made.
6. Click the Revert button to cancel any changes and revert back to the last saved configuration.
7.
8. Select an Allowed AP and click the Edit button to launch a screen used to modify the index and
9. Select an Allowed AP and click the Delete button to remove the AP from list of Allowed APs.
10. Click the Add button to display a screen used to enter device information for a new AP added
Adding or editing an allowed AP
To add a new address range or modify the address range used to designate devices as allowed:
1. Select Security > Access Point Intrusion Detection from the main tree menu.
2. Click the Configuration tab.
3. Select an existing Allowed AP and click the Edit button to modify the properties of an existing
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01
NOTE
When using Client Assisted Scans with a Mobility 300 Access Point the Client Assisted scan will
begin as soon as the Enable checkbox is selected. Subsequent scans will take place based on
the time defined in the Refresh Time field.
NOTE
When using Client Assisted Scans with a Mobility 5181 the Client Assisted scan will not begin
immediately. The first scan will begin after the current Refresh Time cycle has expired.
Refer to the Allowed APs field to view the policies used for interpreting Access Points as
allowed.
Index
Displays the numerical identifier (index value) assigned to this particular set of
Allowed APs. Assign this value by clicking Add for a new set of Access Point
address information or click the Edit button to revise the index. The Index can be
used as reference to group specific devices numerically to a specific range of MAC
or ESSID addresses. This user cannot modify the index from this screen.
BSS MAC Address
Displays the MAC address of the Allowed AP(s). The MAC addresses displayed are
defined by clicking the Add button and entering a specific MAC address or by
allowing all MAC addresses to be allowed. The list of MAC addresses allowed can
be modified by highlighting an existing entry, clicking the
the properties of the MAC address.
ESSID Displays the ESSIDs of the Allowed AP(s). The addresses displayed are defined by
clicking the Add button and entering a specific MAC address or by allowing all MAC
addresses to be allowed. The list of MAC addresses allowed can be modified by
highlighting an existing entry, clicking the Edit button and revising the properties of
the MAC address.
SSID of the AP. For more information, see
to the Allowed AP list. For more information, see
page 337.
Allowed AP or click the Add button to define the attributes of a new Allowed AP.
AP intrusion detection
"Adding or editing an allowed AP"
"Adding or editing an allowed AP"
6
Edit
button and revising
on page 337.
on
337