Brocade Communications Systems RFS6000 System Reference Manual page 239

3. With the Select Radios/BSS field, select the radio type to configure (802.11bg and 802.11bgn
4. Select the desired BSS from the BSS list or select a Radio (802.11bg and 802.11bgn or
5. Refer to the Select/Change Assigned WLAN field for the following information:
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01
The Assigned WLANs tab displays two fields: Select Radios/BSS and
Select/Change Assigned WLANs.
or 802.11a and 802.11an) from the Select Radio drop-down menu.
802.11a and 802.11an) to modify.
Primary WLAN
If a specific BSS was selected from the Select Radio/BSS area, choose one of the
selected WLANs from the drop-down menu as the primary WLAN for the BSS.
If the radio was selected, the applet will automatically assign one WLAN to each
BSS in order, and that WLAN will be set as the Primary WLAN for the BSS.
If the number of WLANs selected is greater than the number of BSSIDs, the
remaining WLANs are included with the last BSS.
Assign
Assign the WLAN(s) to the selected BSS or Radio.
Index Displays (in ascending order) the numerical index assigned to each SSID. Use the
index (along with the WLANs name) as a means of identifying WLANs once
assigned to different radio BSSIDs. A BSSID cannot support two WLANs with the
same numerical index.
Description Use the WLAN description (along with the WLANs index) as a means of identifying
WLANs assigned to different radio BSSIDs. A BSSID cannot support two WLANs
with the same description.
Viewing Access Point adoption defaults
4
225