Configuring Trap Thresholds - Brocade Communications Systems RFS6000 System Reference Manual

7
Configuring SNMP traps
5. Click OK to save and add the changes to the running configuration and close the dialog.
6. Click Cancel to close the dialog without committing updates to the running configuration.

Configuring trap thresholds

Use the Wireless Statistics Thresholds screen to modify existing threshold conditions values for
individual trap descriptions. Refer to the greater than, less than and worse than conditions to
interpret how the values should be defined. Additionally, the Unit of threshold Values increment
should be referenced to interpret the unit of measurement used.
To configure SNMP trap threshold values:
1. Select Management Access > SNMP Trap Configuration from the main menu tree.
2. Click the Wireless Statistics Thresholds tab.
478
From Address
Enter an e-mail address serving as the From address for the notifications sent by
the controller.
Subject Prefix Enter a short subject line that prepends the subject line in each outgoing
notification e-mail.
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01