Brocade Communications Systems RFS6000 System Reference Manual page 228

4
Viewing access point information
10. Once the settings have been configured, click the Run Calibration button to start a Smart RF
11. Click the Calibration Status button to open a dialogue with the following calibration status
12. Click OK to use the changes to the running configuration and close the dialog.
13. Click Cancel to close the dialog without committing updates to the running configuration.
214
Start Time
If scheduled RF Calibration is enabled, enter a start time in HH:MM:SS format for
the start time of scheduled calibration.
Interval If scheduled RF Calibration is enabled, enter an interval in days for how long the
scheduled calibration should continue after its start date.
calibration.
information
Last Calibration Start Displays the date and time that the last Smart RF calibration began.
Time
Last Calibration End
Displays the date and time that the last Smart RF calibration ended.
Time
Next Calibration Start Displays the date and time scheduled for the next Smart RF calibration.
Time
Current Action Displays what the Smart RF engine is currently doing. If there is a scan in process it
will be displayed here.
Master Controller IP Displays the IP address of the master controller in the cluster.
Is Cluster Master
Displays the cluster master status of the controller. If the controller is the master it
will display true, otherwise it will display false.
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01