Adding Snmp Trap Receivers - Brocade Communications Systems RFS6000 System Reference Manual

4. Define a Port Number for the trap receiver.
5. Use the Protocol Options drop-down menu to specify the trap receiver as either a SNMP v2c or
6. Click OK to save and add the changes to the running configuration and close the dialog.
7.
8. Click Cancel to close the dialog without committing updates to the running configuration.

Adding SNMP trap receivers

The SNMP Add screen is designed to create a new SNMP trap receiver. Use the Add screen to
create a new trap receiver IP Address, Port Number and v2c or v3 designation. Add new destination
trap receivers as required to suit the various traps enabled and their function in supporting the
controller managed network.
To add a new SNMP trap receiver:
1. Select Management Access > SNMP Trap Receivers from the main menu tree.
2. Click the Add button at the bottom of the screen.
3. Create a new (non DNS name) destination IP Address for the new trap receiver to be used for
4. Define a Port Number for the trap receiver.
5. Use the Protocol Options drop-down menu to specify the trap receiver as either a SNMP v2c or
6. Click OK to save and add the changes to the running configuration and close the dialog.
7.
8. Click Cancel to close the dialog without committing updates to the running configuration.
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01
If it is still a valid IP address, consider clicking the Add button from within the SNMP Trap
Receivers screen to add a new address without overwriting this existing one.
v3 receiver.
Refer to the Status field for the current state of the requests made from applet. This field
displays error messages if something goes wrong in the transaction between the applet and
the controller.
receiving the traps sent by the SNMP agent.
v3 receiver.
Refer to the Status field for the current state of the requests made from applet. This field
displays error messages if something goes wrong in the transaction between the applet and
the controller.
Configuring SNMP trap receivers
7
483