Brocade Communications Systems RFS6000 System Reference Manual page 318

5
Configuring controller redundancy and clustering
5. Refer to the Status field.
6. Click Close to close the dialog without committing updates to the running configuration.
Adding a redundancy group member
Use the Add screen as the means to add a new member (by adding their IP address) to an existing
redundancy group (cluster).
To add a new member to a redundancy group:
1. Select Services > Redundancy from the main menu tree.
2. Select the Member tab.
3. Select the Add button.
4. Enter the IP Address of a new member.
5. Click OK to save and add the changes to the running configuration and close the dialog.
6. Refer to the Status field.
7.
304
Rogue APs
Displays the number of Rogue APs detected by each member. Use this information
to discern whether these radios represent legitimate threats to other members of
the redundancy group.
Self Healing Radios
Displays the number of self healing radios on each detected member. These radios
can be invaluable if other radios within the redundancy group were to experience
problems requiring healing by another radio.
The Status is the current state of the requests made from the applet. Requests are any
"SET/GET" operation from the applet. The Status field displays error messages if something
goes wrong in the transaction between the applet and the controller.
The Redundancy screen displays with the Configuration tab selected.
The Status is the current state of the requests made from the applet. Requests are any
"SET/GET" operation from the applet. The Status field displays error messages if something
goes wrong in the transaction between the applet and the controller.
Click Cancel to close the dialog without committing updates to the running configuration.
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01