Brocade Communications Systems RFS6000 System Reference Manual page 438

6
Configuring IPSec VPN
3. Refer to the following read-only information displayed within the Interfaces tab.
4. Click the Assign Interface button to assign a Crypto Map to each interface through which IPSec
424
Name Lists the name of the Crypto Maps available for the interface.
Interface Name Displays the name of the interface through which IPSec traffic flows. Applying the
Crypto Map set to an interface instructs the controller to evaluate all the
interface's traffic against the Crypto Map set and to use the specified policy during
connection or security association negotiation on behalf of traffic protected by
crypto (either CET or IPSec).
traffic flows.
Assigning the Crypto Map set to an interface instructs the security appliance to evaluate all the
traffic against the Crypto Map set and use the specified policy during connection or SA
negotiation. Assigning a Crypto Map to an interface also initializes run-time data structures
(such as the SA database and the security policy database). Reassigning a modified Crypto
Map to the interface resynchronizes the run-time data structures with the Crypto Map
configuration. Also, adding new peers through the new sequence numbers and reassigning the
Crypto Map does not break existing connections.
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01