4
Configuring Access Points
4. Configure the Country and VLAN Tagging for the selected AP:
5. Select a template from the list below for the Access Point:
234
Country
Select the Country that the Access Point will be configured to operate in.
AP Native VLAN for
Select whether the native VLAN for the Access Point on LAN1 will be Tagged or
Untagged.
LAN1
AP Native VLAN for
Select whether the native VLAN for the Access Point on LAN2 will be Tagged or
LAN2
Untagged.
A/B/G/N WLAN and
Enables 802.11a, 802.11g, 802.11bgn and 802.11an for the WLAN and
dedicates the AP as a sensor.
Sensor
B/G/N WLAN and
Enables 802.11g and 802.11bgn for the WLAN and dedicates the AP as a sensor.
Sensor
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01