Brocade Communications Systems RFS6000 System Reference Manual page 315

3. Refer to the following information within the Member tab:
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01
IP Address Displays the IP addresses of the redundancy group member.
Status Displays the current status of this group member. This status could have the
following values:
Configured - The member is configured on the current wireless service module.
Seen - Heartbeats can be exchanged between the current controller and this
member.
Invalid - Critical redundancy configuration parameter(s) of the peer (heartbeat
time, discovery time, hold time, Redundancy ID, Redundancy Protocol version of
this member) do not match this controller's parameters.
Not Seen - The member is no more seen by this controller.
Established - The member is fully established with this current module and
licensing information already been exchanged between this controller and the
member.
Unknown - No status information could be obtained.
Last Seen
Displays the time when this member was last seen by the controller.
AP Adoption Count
Displays the number of Access Points adopted by this member.
AAP Adoption Count
Displays the number of Adaptive APs adopted by this member.
AP License Count
Displays the number of Access Point licenses installed on this member.
Configuring controller redundancy and clustering
5
301