9. To clear statistics for Denial of Service Attacks, click the Clear button. This will reset all Attack
10. Click the Apply button to save the changes made within the DoS Attach screen.
11. Click the Revert button to cancel any changes made within the DoS Attach screen and revert
Configuring the role
To view configured roles for a firewall:
1. Select Security > Wireless Firewall from the main tree menu.
2. Click the Configuration tab.
3. Click the Role tab.
4. Role configuration screen displays the following information:
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01
Counts to 0 and all Last Occurrence times to 0:00:00.00.
back to the last saved configuration.
Sequence Number
Displays the sequence number associated with each role. Sequence numbers
determine the order that role are applied. Roles with lower sequence numbers are
applied before those with higher sequence numbers. Sequence numbers are
assigned when a role is created and cannot be edited.
Role Name
Displays the name of each role. The role name is configured when the role is
created and cannot be edited.
Configuring firewalls and access control lists
6
377