Brocade Communications Systems RFS6000 System Reference Manual page 317

4. Refer to the following redundancy member information:
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01
IP Address
Displays the IP addresses of the members of the redundancy group. There are a
minimum of 2 members needed to define a redundancy group, including this
current module.
Status Displays the current status of this group member. This status could have the
following values:
•
Configured - The member is configured on the current wireless service
module.
•
Seen - Heartbeats can be exchanged between the current controller and this
member.
•
Invalid - Critical redundancy configuration parameter(s) of the peer (heartbeat
time, discovery time, hold time, Redundancy ID, Redundancy Protocol version
of this member) do not match this controller's parameters.
•
Not Seen - The member is no more seen by this controller.
•
Established - The member is fully established with this current module and
licensing information already been exchanged between this controller and the
member.
AP Adoption Count
Displays the number of Access Points adopted by this member.
AAP Adoption Count
Displays the number of Adaptive Access Points adopted by this member.
Adoption Capacity
Displays the maximum number of Access Points this member is licensed to adopt.
For information on licensing rules impacting redundancy group members, see
"Redundancy group license aggregation rules"
AP License Count Displays the number of Access Point licenses available for this controller. For
information on licensing rules impacting redundancy group members, see
"Redundancy group license aggregation rules"
AAP License Count Displays the number of Adaptive Access Point licenses available for this controller.
For information on licensing rules impacting redundancy group members, see
"Redundancy group license aggregation rules"
Image Version
Displays the image version currently running on this member. Is the selected
version complimentary with this controller's version?
First Seen Displays the time this member was first seen by the controller.
Last Seen Displays the time this member was last seen by the controller.
Mode The Redundancy Mode could be Active or Standby depending on the mode
configuration on the member. Refer to the Configuration screen to change the
mode
HB Sent
Displays the number of heartbeats sent from the controller to this member since
the last reboot of the controller.
HB Received Displays the number of heartbeats received by the controller since the last reboot.
Updates Sent Displays the number of updates sent from the controller since the last reboot.
Updates include, authorization level, group authorization level and number of
Access Points adopted.
Updates Received Displays the number of updates received by the current controller from this
member since the last reboot.
Radio Portals Displays the number of radio portals detected on each redundancy member listed.
Associated Clients Display the number of Clients associated with each member listed.
Configuring controller redundancy and clustering
on page 305.
on page 305.
on page 305.
5
303