Brocade Communications Systems RFS6000 System Reference Manual page 425

Provides centralized wireless lan (wlan) configuration and management

Hide thumbs Also See for RFS6000:

Table of Contents

1. Select Security > IPSec VPN from the main menu tree.

2. Click the Remote tab.

3. Refer to the Configuration field to define the following:

4. Click the IP Range tab to view the following:.

Brocade Mobility RFS6000 and RFS7000 System Reference Guide

53-1001858-01

Enter the numerical IP address of the DNS Server used to route information to the

remote destination of the IPSec VPN.

Enter the numerical IP address of the WINS Server used to route information to the

remote destination of the IPSec VPN.

Click Apply to save any updates made to the screen.

Click the Revert button to disregard changes and revert back to the last saved

configuration.

Enter the index assigned to the range of IP addresses displayed in the Starting and

Ending IP Address ranges. This index is used to differentiate the index from others

with similar IP addresses.

Starting IP Address

Enter the numerical IP address used as the starting address for the range defined.

If the Ending IP address is left blank, only the starting address is used for the

remote destination.

Ending IP Address

Enter a numerical IP address to complete the range. If the Ending IP address is

blank, only the starting address is used as the destination address.

Configuring IPSec VPN