Brocade Communications Systems RFS6000 System Reference Manual page 294

5
DHCP server settings
3. Refer to the Pool Class Names field to configure a pool class. A pre configured pool and class
4. Click the Edit button to modify the properties displayed for an existing DHCP Pool Class Name.
5. To delete an existing DHCP pool class name and its associated address range, select the pool
6. Click the Add button create a new pool class name. For more information, see
Editing an existing DHCP pool class
The Edit DHCP Pool Class Configuration dialog is used to edit the association of a DHCP pool name
to a DHCP class name. It is also used to configure a maximum of 4 pool class address range. To
revise an existing DHCP pool class name:
1. Select Services > DHCP Server from the main menu tree.
2. Select the Pool Class tab.
3. Click on the Edit button from the Pool Class Names section.
4. Refer to the read-only Pool Name to ensure modifications are made to the correct pool name.
280
must exist to configure a pool class.
The Address Ranges section displays the address ranges associated with the pool class.
For more information, see
class name from the Pool Class Names field and click the Delete button.
DHCP pool class" on page 281.
"Editing an existing DHCP pool class"
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
on page 280.
"Adding a new
53-1001858-01