Brocade Communications Systems RFS6000 System Reference Manual page 493

3. Refer to the following information for thresholds descriptions, conditions, editable threshold
4. Select a threshold and click the Edit button to display a screen wherein threshold settings for
5. Use the Maximum Number of Packets to Send a Trap field (at the bottom of the screen) to
6. Click the Apply button to save changes made to the screen since the last saved configuration.
7.
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01
values and units of measurement.
Threshold Name
Displays the target metric for the data displayed to the right of the item. It defines
(Description) a performance criteria used as a target for trap configuration.
Threshold Conditions Displays the criteria used for generating a trap for the specific event. The
Threshold conditions appear as greater than, less then or worse then and define a
baseline for trap generation.
Threshold values for:
Displays a threshold value for associated Clients. Use the Threshold Name and
Threshold Conditions as input criteria to define an appropriate Threshold Value
Client
unique to the Clients within the network. For information on specific values, see
"Wireless trap threshold values"
Threshold values for: AP
Set a threshold value for adopted APs. Use the Threshold Name and Threshold
Conditions as input criteria to define an appropriate Threshold Value unique to the
APs within the network. For information on specific values, see
threshold values"
Threshold values for:
Use the Threshold Name and Threshold Conditions as input criteria to define an
appropriate Threshold Value unique to the controller. For information on specific
WLAN
values, see
Threshold values for: Use the Threshold Name and Threshold Conditions as input criteria to define an
Controller appropriate Threshold Value unique to the controller. For information on specific
values, see
Unit of Threshold Displays the measurement value used to define whether a threshold value has
Values been exceeded. Typical values include Mbps, retries and %. For information on
specific values, see
the Client, AP and WLAN can be modified.
Adjust the values as needed (between 0 -100) to initiate a trap when the value is exceeded for
the Client, AP or WLAN. Ensure the value set is realistic, in respect to the number of Clients and
APs supporting WLANs within the controller managed network.
enter a value used as the minimum number of data packets required for a trap to be
generated for a target event. Ensure the value is realistic, as setting it to low could generate
traps unnecessarily. Refer to
information.
Click the Revert button to revert the screen back to its last saved configuration. Changes made
since the contents of the screen were last applied are discarded.
on page 480.
on page 480.
"Wireless trap threshold values"
"Wireless trap threshold values"
"Wireless trap threshold values"
"Wireless trap threshold values"
Configuring SNMP traps
"Wireless trap
on page 480.
on page 480.
on page 480.
on page 480 for additional
7
479