Brocade Communications Systems RFS6000 System Reference Manual page 112

4
Configuring controller virtual interfaces
3. Select a record from the table and click the Edit button to modify the record. For more
4. Select a record from the table and click the Delete button to remove the configuration from the
5. Click the Add button to add a new configuration to the controller virtual interface. For more
6. Select an interface as click the Startup button to invoke the selected interface the next time
7.
Adding a virtual interface
To add a new controller virtual interface:
1. Select Network > Controller Virtual Interface from the main tree menu.
2. Select the Configuration tab.
3. Click on the Add button.
4. Enter the VLAN ID for the controller virtual interface.
5. Provide a Description for the VLAN, representative of the VLAN's intended operation within the
6. The Primary IP Settings field consists of the following:
7.
8. Enter the IP Address for the VLAN associated virtual interface.
9. Enter the Subnet Mask for the IP address.
98
information, see "Modifying a virtual interface"
list of controller virtual interfaces.
information, see "Adding a virtual interface"
the controller is booted.
Select an interface as click the Shutdown button to disable the selected interface.
controller managed network.
Select Use DHCP to obtain IP Address automatically to allow DHCP to provide the IP address for
the virtual interface. Selecting this option disables the IP address field.
on page 99.
on page 98.
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01