Brocade Communications Systems RFS6000 System Reference Manual page 111

Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01
The following configuration details display in the table:
Name Displays the name of the virtual interface.
VLAN ID Displays the VLAN ID associated with the interface.
DHCP Enabled
Displays whether the DHCP client is enabled or not. A green check mark defines
the DHCP client as enabled for the interface. A red X means the interface is
disabled.
Primary IP Address Displays the IP address for the virtual interface.
Primary Subnet Mask
Displays the subnet mask assigned for this interface.
Admin Status Displays whether the virtual interface is operational and available to the controller.
Oper Status Displays whether the selected Controller Virtual Interface is currently (Up) or not
(Down) on the controller.
Management Interface
A green checkmark within this column defines this VLAN as currently used by the
controller. This designates the interface settings used for global controller settings
in case of conflicts. For example, if multiple SVIs are configured with DHCP enabled
on each, the controller could have multiple domain names assigned from different
DHCP servers.The one assigned over the selected Management Interface would be
the only one used by the controller. This setting does not affect any of the
Management Access Interfaces configured using
page 464.
Configuring controller virtual interfaces
"Configuring access control"
4
on
97