Brocade Communications Systems RFS6000 System Reference Manual page 197

NOTE
The screen display can vary slightly depending on whether the Access Point radio is an 802.11bg
and 802.11bgn or 802.11a and 802.11an model.
To edit a radio's configuration:
1. Select Network > Access Point Radios from the main menu tree.
2. Click the Configuration tab.
3. Select a radio to edit from the table.
4. Click the Edit button to display a screen containing settings for the selected radio.
5. The Controller field displays the IP address of the cluster member associated with each Access
6. In the Radio Descr. field, enter a brief description to differentiate the radio. The description is
7.
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01
Point radio. When clustering is enabled on the controller and Cluster GUI is enabled the
Controller field will be available on the Access Point Radio edit screen. For information on
configuring enabling Cluster GUI, see
used to describe radios of the same type and can be used to locate a radio if there are any
problems.
Select the Dedicate this AP as Detector AP option to use this radio as a detector port to identify
rogue APs on the network.
Viewing access point information
"Managing clustering using the Web UI"
4
on page 305.
183