Configuring Firewall Logging Options - Brocade Communications Systems RFS6000 System Reference Manual

6
Configuring firewalls and access control lists
6. Refer to the Status field for the state of the requests made from applet. This field displays error
7.
8. Click Cancel to close the dialog without committing updates to the running configuration.

Configuring firewall logging options

To view firewall logging rules:
1. Select Security > Wireless Firewall from the main tree menu.
2. Click the Configuration tab.
3. Click the Log Options tab.
380
ESSID
Select an ESSID filter, if any, to apply to the role.
Available ESSID filters are:
Exact: The role will only be applied when the exact ESSID string specified in the
role
Contains: The role will be applied when the ESSID contains the string specified in
the role
Not Contains: The role will be applied when the ESSID does not contain the string
specified in the role
Any: The role is applied to any ESSID
Group Name
Select a Group Name filter, if any, to apply to the role.
Available Group Name filters are:
Exact: The role will only be applied when the exact Radius Group Name string
specified in the role
Contains: The role will be applied when the Radius Group Name contains the string
specified in the role
Not Contains: The role will be applied to when the Radius Group Name does not
contain the string specified in the role
Any: The role will be applied to any Radius Group Name
Client MAC Address
Configure the Client MAC Address filters, if any, applied to each role. The Client
MAC Address filter can be set to apply the role to any Client MAC Address or a
specific Client MAC Address or a Client MAC Mask.
Authentication Select an Authentication filter, if any, to apply to the role.
Available Authentication filters are:
Equals: The role will only be applied when the Authentication type matches the
exact Authentication method specified in the role
Not Equals: The role will only be applied when the Authentication type does not
match the exact Authentication method specified in the role
Any: The role will be applied to any Authentication type
Encryption
Select an Encryption filter, if any, to apply to the role.
Available Encryption filters are:
Equals: The role will only be applied when the Encryption type matches the exact
Encryption method specified in the role
Not Equals: The role will only be applied when the Encryption type does not match
the exact Encryption method specified in the role
Any: The role will be applied to any Encryption type
messages if something goes wrong in the transaction between the applet and the controller.
Click OK to use the changes to the running configuration and close the dialog.
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01