Brocade Communications Systems RFS6000 System Reference Manual page 373

4. Refer to the following information as displayed within the Attach-WLAN tab:
5. Select a WLAN (by row) and click Edit to modify the WLAN Index, IP ACL and MAC ACL values.
6. Select a row and click the Delete button to delete the ACL from the list available (but not from
7.
Adding or editing a new ACL WLAN configuration
After creating an ACL, it can be applied to one or more WLANs on the controller. To attach an ACL to
a WLAN:
1. Select Security > Wireless Firewall from the main menu tree.
2. Click the Security Policy tab.
3. Click the Attach-WLAN tab.
4. Click the Add button to create a new ACL WLAN association or highlight an existing association
5. Define a WLAN Index between 1 and 32.
6. Use the IP ACL drop-down menu to select an IP ACL for the WLAN.
7.
8. Select either the Inbound or Outbound radio button to define which direction the ACL applies.
9. Refer to the Status field for the state of the requests made from applet. This field displays error
10. Click OK to use the changes to the running configuration and close the dialog.
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01
WLAN Index
Displays the list of WLANs attached with ACLs.
IP ACL
Displays the IP ACL configured.
MAC ACL
Displays the MAC ACL configured.
Direction
Displays whether the WLAN ACL is configured to work in an inbound or outbound
direction.
the controller).
Click the Add button to add an ACL to a WLAN interface. For more information, see
editing a new ACL WLAN configuration"
and click the Edit button.
Use the MAC ACL drop-down menu to select the MAC ACL for the WLAN interface.
messages if something goes wrong in the transaction between the applet and the controller.
Configuring firewalls and access control lists
on page 359.
6
"Adding or
359