Brocade Communications Systems RFS6000 System Reference Manual page 177

4. The List Name displays the read-only name of the list for which you wish to add more devices.
5. Enter the Host Name for the device you wish to add for the selected exclude list.
6. Enter a valid MAC Address for the device you wish to add.
7.
8. Refer to the Status field. It displays the current state of the requests made from the applet.
9. Click OK to save and add the new configuration and close the dialog window.
10. Click Cancel to close the dialog without committing updates to the running configuration.
Mapping exclude list items to WLANs
To assign exclude list items to a one or more WLANs:
1. Select Network > Wireless LANs from the main menu tree.
2. Select the NAC Exclude tab to view NAC excluded devices.
3. Select a item from the Exclude List's List Name field and click the Edit button (within the
4. Map the selected list item with as many WLANs as needed (be selecting the WLAN's checkbox).
5. To remove the WLAN Mappings, select the Deselect All button to clear the mappings.
6. Refer to the Status field for a display of the current state of the requests made from the applet.
7.
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01
Optionally, enter the MAC Mask for the device you wish to add.
Requests are any "SET/GET" operation from the applet. The Status field displays error
messages if something goes wrong in the transaction between the applet and the controller.
Configured WLANs field).
Use the Select All button to associate each WLAN with the selected list item.
Requests are any "SET/GET" operation from the applet. The Status field displays error
messages if something goes wrong in the transaction between the applet and the controller.
Click OK to save and add the new configuration and close the dialog window.
Viewing and configuring controller WLANs
4
163