Brocade Communications Systems RFS6000 System Reference Manual page 259

.
To configure the MSTP bridge:
1. Select Network > Multiple Spanning Tree from the main menu tree.
2. Select the Bridge tab (should be the displayed tab by default).
3. Refer to the MSTP Parameter field to view or set the following:
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01
Global MSTP Status Use the drop-down menu to define MSTP status. The default is Enabled.
Max Hop Count Displays the maximum allowed hops for a BPDU (Bridge Protocol Data Unit) in an
MSTP region. This value is used by all the MSTP instances.
Supported Versions Displays the different versions of STP supported.
Protocol Version Displays the current protocol version in use. Available MSTP protocol versions are:
•
forceNonStp
•
forceLegacyDot1d
•
forceDot1w
•
autoDot1s
•
unknown
MST Config. Name Enter a name for the MST region. This is used when configuring multiple regions
within the network. Each controller running MSTP is configured with a unique MST
region name. This helps when keeping track of MSTP configuration changes.
Increment this number with each configuration change. The revision-level specifies
the revision-level of the current configuration.
Multiple Spanning Tree
4
245