Brocade Communications Systems RFS6000 System Reference Manual page 89

1. Select Controller > Automatic Updates from the main menu tree.
2. Refer to the Controller Configuration field to enable and define the configuration for automatic
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01
configuration file updates. If enabled, the located (updated) configuration file will be used with
the controller the next time the controller boots.
Enable
Select the Enable checkbox to allow an automatic configuration file update when a
newer (updated) file is detected (upon the boot of the controller) at the specified IP
address.
IP Address Define the IP address of the server where the configuration files reside. If a new
version is detected when the controller is booted, it is uploaded to the controller
and used upon the next boot of the controller.
User ID Enter the User ID required to access the FTP or TFTP server.
File Name Provide the complete and accurate path to the location of the configuration files on
(With Path) the server. This path must be accurate to ensure the most recent file is retrieved.
Protocol Use the Protocol drop-down menu to specify the FTP, TFTP, HTTP, SFTP or resident
controller FLASH medium used for the file update from the server. FLASH is the
default setting.
Password Enter the password required to access the server.
Configuring automatic updates
3
75