Brocade Communications Systems RFS6000 System Reference Manual page 369

7.
8. Click OK to use the changes to the running configuration and close the dialog.
9. Click Cancel to close the dialog without committing updates to the running configuration.
Adding a new ACL rule
To add a new rule:
1. Select Security > Wireless Firewall from the main tree menu.
2. Click the Configuration tab.
3. Click the ACL tab.
4. Click the Add button within the Associated Rules field.
5. Use the Precedence field to enter a precedence (priority) value between 1 and 5000.
6. Use the Operation drop-down menu to define a permit, deny or mark designation for the ACL. If
7.
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01
Refer to the Status field for the current state of the requests made from applet. This field
displays error messages if something goes wrong in the transaction between the applet and
the controller.
The rules within an ACL will be applied to packets based on their precedence value. Rules with
lower precedence are always applied first.
NOTE
If adding an access control entry to an ACL using the controller SNMP interface, Precedence is
a required parameter.
the action is to mark, the packet is tagged for priority.
Select the Logging checkbox to generate log messages when a packet has been forwarded,
denied or marked based on the criteria specified in the access lists.
Configuring firewalls and access control lists
6
355