6. To enable Secure Mode click the Enable Secure Mode button to enable secure-mode to a set
7.
8. When using clustering and the Cluster GUI feature is enabled, a drop-down menu is available
Configuring Adaptive AP firmware
Refer to the AP Firmware tab to view the Access Point and Adaptive AP firmware image associated
with each adopted Access Point or Adaptive AP. The screen allows you to update the firmware
image for Adaptive APs that associate with the controller.
To view AP firmware information:
1. Select Network > Access Point from the main menu tree.
2. Click the AP Firmware tab.
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01
of APs. The AP's MAC Address and mode will be saved in the running configuration. If
secure-mode is set to enable, it means that WISP-e transactions for this AP will be secured.
To disable Secure Mode click the Disable Secure Mode button to disable secure-mode to a set
of APs. The AP's MAC Address and mode will be saved in the running configuration. If
secure-mode is set to disable, it means that WISP-e transactions for this AP will not be
secured.
to select which cluster members' APs are displayed. To view APs from all cluster members,
select All from the drop-down menu. To view APs radios from a specific cluster member, select
that member's IP address from the drop-down menu.
Configuring Access Points
4
239