Configuring Layer 2 Firewall - Brocade Communications Systems RFS6000 System Reference Manual

6
Configuring firewalls and access control lists
6. Select the box to the right of each WLAN you want associated with the ACL.
7.
8. Click OK to use the changes to the running configuration and close the dialog.
9. Click Cancel to close the dialog without committing updates to the running configuration.

Configuring Layer 2 Firewall

To review Layer 2 firewall rules:
1. Select Security > Wireless Firewall from the main tree menu.
2. Select the Configuration tab.
3. Click the L2 tab.
368
Selecting a WLAN maps it the MAC address range and allow or deny designation assigned to it.
Consequently, be sure you are not restricting Client traffic for a WLAN that requires those MAC
addresses to interact with the controller.
Refer to the Status field for the state of the requests made from applet. This field displays error
messages if something goes wrong in the transaction between the applet and the controller.
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01