Brocade Communications Systems RFS6000 System Reference Manual page 194
Provides centralized wireless lan (wlan) configuration and management
Hide thumbs
Also See for RFS6000:
- Cli reference manual (839 pages) ,
- System reference manual (553 pages)
Table of Contents
Advertisement
4
Viewing access point information
4. To use the AP as a Base Bridge check the Base Bridge checkbox and configure the following
5. To use the AP as a Client Bridge check the Client Bridge checkbox and configure the following
Configuring an AP's global settings
Use the Global Settings screen to define an adoption preference ID for the controller and enable an
option to adopt non-configured radios. This can be helpful when you do not want to change an
Access Point's configuration but require the Access Point be adopted.
To edit Global Radio configuration settings:
1. Select Network > Access Point Radios from the main menu tree.
2. Click the Configuration tab.
180
information:
Maximum Number of
When an radio has been configured as a Base Bridge, specify the maximum
Client Bridges
number of Client Bridges that can connect to the Base Bridge.
information:
Mesh Network Name
When Client Bridge is enabled, enter the name of the Mesh Network that the
selected radio will be a Client Bridge on.
Max Client Bridge Mesh
When Client Bridge is enabled, specify the maximum number of base bridges per
Associations
client bridge in an AP Mesh Network.
Mesh Time Out
When Client Bridge is enabled, select either Enabled or Disabled to determine if
the radio will time out mesh client associations.
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01
Advertisement
Table of Contents
