Configuring Controller Authentication - Brocade Communications Systems RFS6000 System Reference Manual

3. Enter the new guest-admin login name for the user in the Username field.
4. Enter the authentication password for the guest-admin in the Password field and reconfirm the
5. Assign the guest-admin WebUser Administrator access.
6. Add guest users by name, start date and time, expiry date and time and user group.
7.
8. Repeat this process as necessary until all required guest users have been created with

Configuring controller authentication

The controller provides the capability to proxy authenticate requests to a remote Radius Server.
Refer to the Authentication tab to view and configure the Radius Server used by the local user to
log into the controller.
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01
same again in the Confirm Password field.
NOTE
To create guest users, a guest administrator must be assigned a WebUser Administrator
access mode. None of the other modes launch the required Guest User Configuration screen
upon login.
When the guest-admin user logs in, they are redirected to a Guest User Configuration screen,
wherein start and end user permissions can be defined in respect to specific users.
Optionally, click the Generate button to automatically create a username and password for
each guest user.
relevant passwords and start/end guest group permissions.
Configuring Management Users
7
489