Configuring Ip Filtering - Brocade Communications Systems RFS6000 System Reference Manual

4
Configuring Access Points

Configuring IP filtering

Refer to the IP Filter tab to view the IP filter settings for the controller. The screen allows you to
update the IP filter settings of the controller.
To view IP Filtering information:
1. Select Network > Access Point from the main menu tree.
2. Click the IP Filter tab.
3. The IP Filter Table displays the following information on each configured IP filter:
242
Name
Displays the name for each of the IP filters.
Priority
Displays the numerical priority assigned to each IP filter.
Decision
Defines what to do for filtered IP addresses.
Protocol
Specify the protocol used for the filter policy. The options are ALL, TCP, UDP, ICMP,
PIM, GRE, RSVP, IDP, PUP, EGP, IPIP, ESP, AH, IGMP, IPVG, COMPR_H and RAW_IP.
The protocol number can also be used as the protocol name.
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01