Brocade Communications Systems RFS6000 System Reference Manual page 266

4
Multiple Spanning Tree
3. Select an Id and click the Edit button to revise the selected MSTP port configuration.
Editing a MSTP port configuration
To edit and reconfigure MSTP Port parameters.
1. Select a row from the port table and click the Edit button.
252
Admin Edge Port
A green checkmark defines the listed index enabled as an Admin Edge Port, and a
red "X" defines the listed index as not being an Admin Edge Port. Enable it only on
ports that connect to a single location.
Oper Edge Port
Oper Edge Port Displays whether the port is currently an edge port.
Admin Point-to-Point Displays the point-to-point status as ForceTrue or ForceFalse. ForceTrue indicates
this port should be treated as connected to a point-to-point link. ForceFalse
indicates this port should be treated as having a shared connection.
Oper Point-to-Point Displays whether the listed port index is configured to connect to another port
through a point-to-point link. A green checkmark indicates the port as supporting
point-to-point, and a red "X" indicates the port as having point-to-point disabled.
The following MSTP Port parameters can be reconfigured.
Port Index
Displays the read-only Port Index.
Admin MAC Enable
Displays the status of the Admin MAC Enable. A green check mark indicates the
status as enabled.
Port auto Edge Select the checkbox to use the port as an edge port.
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01