Approved Aps - Brocade Communications Systems RFS6000 System Reference Manual

Approved APs

Those Access Points detected and approved for operation within the controller managed network
can be separately displayed to assess the reporting (detecting) AP, the channel of operation, the
last time the AP was observed on the network and the ESSID. Use this information to assess if an
approved Access Point was incorrectly defined as approved and requires categorization as an
unapproved and disallowed AP.
To review the attributes of allowed APs:
1. Select Security > Access Point Intrusion Detection from the main menu.
2. Select the Approved APs tab.
3. The Approved APs table displays the following information:
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01
BSS MAC Address
Displays the MAC Address of approved APs. These MAC addresses are APs
observed on the network meeting the criteria (MAC and ESSIDs) of allowed APs.
Reporting Radio Displays the numerical value assigned to the radio used with the specific device
MAC Address and SSID listed for this approved AP.
Channel
Displays the channel the approved AP is currently transmitting on. If this device is
operating on a channel not frequently used within your network segment, perhaps
the device is correctly defined as an approved AP.
AP intrusion detection
6
339