Brocade Communications Systems RFS6000 System Reference Manual page 329

2. Select the Enable Neighbor Recovery checkbox.
3. Refer to the Interference Avoidance field to define the following settings:
4. Click the Apply button to save the changes made within this screen. Clicking Apply overwrites
5. Click the Revert button to disregard any changes made within this screen and revert back to
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01
Enabling Neighbor Recovery is required to conduct manual neighbor detection.
Enable Interference
When enabled, the controller is capable of controllering channels on an Access
Avoidance Point (Automatic Channel Selection) if interference is observed on the current
operating channel.
Average Retries Displays the average number of retries for a Client to communicate with a neighbor
radio. Define a retry value between 0.0 and 15.0 retry attempts. Average Retries is
a threshold value, when exceeded ACS is initiated. The default is 14.
Hold Time Set the interval (in seconds) that disables interference avoidance after detection.
The hold time prevents the radio from re-running ACS continuously. The default is
3600.
the previous configuration.
the last saved configuration.
Configuring self healing
5
315