Brocade Communications Systems RFS6000 System Reference Manual page 490

7
Configuring SNMP traps
6. Highlight a specific trap and click the Enable button to enable this specific trap as an active
7.
8. Highlight a sub-menu header (such as Redundancy or Update Server) and click the Enable all
9. Highlight a sub-menu header (such as Redundancy or SNMP) and click the Disable all
10. Click Apply to save the trap configurations enabled using the Enable or Enable all sub-items
11. Click Revert to discard any updates and revert back to its last saved configuration.
Configuring E-mail notifications
To enable e-mail notification:
1. Select Management Access > SNMP Trap Configuration from the main menu tree.
2. Click the Email Configuration button to launch a dialogue where you can configure outgoing
476
SNMP trap.
The items previously disabled (with an "X" to the left) now display with a check to the left of it.
Highlight a specific trap and click the Disable button to disable the item as an active SNMP
trap.
The items previously enabled (with a check to the left) now display with an "X" to the left of it.
sub-items button to enable the item as an active SNMP trap.
Those sub-items previously disabled (with an "X" to the left) now display with a check to the left
of them. Once the Apply button is clicked, the selected items are now active SNMP traps on
the system.
sub-items button to disable the item as an active SNMP trap.
Those sub-items previously enabled (with a check to the left) now display with an "X" to the left
of them.
options.
E-mail servers and addresses for alerts.
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01