Viewing The Detailed Contents Of A Config File - Brocade Communications Systems RFS6000 System Reference Manual

NOTE
Selecting either the startup-config or running-config does not enable the Edit button. A different
configuration must be available to enable the Edit function for the purposes of replacing the existing
startup-config.
4. To permanently remove a file from the list of configurations available to the switch, select a
5. To restore the system's default configuration and revert back to factory default, click the
NOTE
After setting the switch to revert to factory default settings, the system must be rebooted before the
default settings take effect. When this occurs, the switch IP address may change.
6. Click the Transfer Files button to move a target configuration file to a secure location for later

Viewing the Detailed Contents of a Config File

The View screen displays the entire contents of a configuration file. Brocade recommends a file be
reviewed carefully before it is selected from the Config Files screen for edit or designation as the
switch startup configuration.
1. Select a configuration file from the Configuration screen by highlighting the file.
2. Click the View button to see the contents of the selected configuration file.
Brocade Mobility RFS4000, RFS6000, and RFS7000 System Reference Guide
53-1002515-01
configuration file from the table and click the Delete button.
If startup-config is deleted, a prompt displays stating the default switch startup-config will
automatically take its place. The switch running-config cannot be deleted.
Restore Defaults button.
use. For more information, see Transferring a Config File on page
3
3-67.
65