Brocade Communications Systems RFS6000 System Reference Manual page 393

5. To create a new role configure the following information:
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01
Sequence Number
Enter a sequence number to be associated with each role. Sequence numbers
determine the order that role are applied. Roles with lower sequence numbers are
applied before those with higher sequence numbers. Sequence numbers are
assigned when a role is created and cannot be edited.
Role Name
Enter a name for each role. The role name is configured when the role is created
and cannot be edited.
AP Location Select an AP Location filter, if any, to apply to the role.
Available AP Location filters are:
Exact: The role will only be applied to APs with the exact location string specified in
the role
Contains: The role will be applied to APs whose location contains the location
string specified in the role
Not Contains: The role will be applied to APs whose location does not contain the
location string specified in the role
Any: The role will be applied to any AP Locations
Configuring firewalls and access control lists
6
379