Brocade Communications Systems RFS6000 System Reference Manual page 306

Provides centralized wireless lan (wlan) configuration and management

Hide thumbs Also See for RFS6000:

Table of Contents

Configuring secure NTP

After an NTP synchronization using a Symmetric Key, the NTP status will not automatically

To review the controller's current NTP associations:

1. Select Services > Secure NTP from the main menu tree.

2. Select the NTP Status tab.

3. Refer to the SNTP Status field to review the accuracy and performance of the controller's

ability to synchronize with a NTP server:

Indicates if a second will be added or subtracted to SNTP packet transmissions, or

if the transmissions are synchronized.

Displays how many hops the controller is from its current NTP time source.

Displays the address of the time source the controller is synchronized to.

A SNTP server clock's skew (difference) for the controller

Displays the precision (accuracy) of the controller's time clock (in Hz). The values

that normally appear in this field range from -6 for mains-frequency clocks to -20

for microsecond clocks found in some workstations.

Brocade Mobility RFS6000 and RFS7000 System Reference Guide

53-1001858-01