1. Select Services > RTLS from the main menu tree.
2. Select the Site tab.
3. Click the Add button
4. Provide the AP's MAC address and X, Y, and Z coordinates.
5. Select OK when completed to save your AP configuration.
Configuring SOLE parameters
To configure the controller's internal SOLE locationing engine:
1. Services > RTLS from the main menu tree.
2. Select the SOLE tab.
3. Check the Locate All Mobile-Units checkbox to locate all Clients known to the controller across
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01
all WLANs. This will also disable manual entry of Client MAC addresses in the field below.
This takes effect immediately when the box is checked.
5
Locationing
327