Brocade Communications Systems RFS6000 System Reference Manual page 204

Provides centralized wireless lan (wlan) configuration and management

Hide thumbs Also See for RFS6000:

Table of Contents

Viewing access point information

1. Select Network > Access Point Radios from the main menu.

2. Click the Configuration tab.

3. Select a target index from amongst those displayed.

4. Select the AP Mesh button at the bottom of the Configuration screen.

Select the Base Bridge checkbox to allow the AP radio to accept client bridge

connections from other access points in client bridge mode. The base bridge is the

acceptor of mesh network data from those client bridges within the mesh network

and never the initiator.

Maximum no. of Client

Define the client bridge load on this particular base bridge.

Client Bridge

Select the Client Bridge checkbox to enable the access point radio to initiate client

bridge connections with other mesh network supported access point's using the

Brocade Mobility RFS6000 and RFS7000 System Reference Guide

53-1001858-01