Brocade Communications Systems RFS6000 System Reference Manual page 434

6
Configuring IPSec VPN
3. Refer to the read-only information displayed within the Manual SAs tab to determine whether a
4. If a Crypto Map with a manual security association requires revision, select it from amongst
5. Select an existing table entry and click the Delete button to remove it from the list of those
6. If a new Crypto Map manual security association requires creation, click the Add button
420
Crypto Map (with a manually defined security association) requires modification or if a new one
requires creation.
Priority / Seq # Displays the Seq # (sequence number) used to determine priority. the lower the
number the higher the priority.
Name Displays the name assigned to the security association.
IKE Peer Displays the IKE peer used with the Crypto Map to build an IPSec security
association.
ACL ID
Displays the ACL ID the Crypto Map's data flow uses to establish access
permissions.
Transform Set Displays the transform set representing a combination of security protocols and
algorithms. During the security association negotiation, peers agree to use a
particular transform set for protecting the data flow.
those displayed and click the Edit button to revise its Seq #, IKE Peer, ACL ID and security
protocol.
available to the controller.
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01