4
Viewing and configuring controller WLANs
6. Ensure Advanced is selected from within the This WLAN's Web Pages are of the drop-down
7.
128
menu.
Define the advanced hotspot configuration following step 5 onward in
advanced hotspot"
on page 125.
NOTE
For information on configuring external Radius server support for supporting a advanced
hotspot, see
"Configuring external Radius server support"
Use the controller CLI to define the attributes of the local Radius server configuration.
The following is an example of just the CLI needed to support the local Radius server
configuration:
wlan 2 enable
wlan 2 description MOTO-GUEST
wlan 2 ssid MOTO-GUEST
wlan 2 vlan 70
wlan 2 authentication-type hotspot
wlan 2 Client-Client-disallow
wlan 2 hotspot webpage-location advanced
wlan 2 radius server primary 192.168.10.14
wlan 2 radius server primary radius-key 0 ESELAB
wlan 2 radius reauth 3600
wlan 2 radius accounting server primary 192.168.10.14
wlan 2 radius accounting server primary radius-key 0 ESELAB
!
! Output Omitted
!
radius-server local
authentication eap-auth-type all
nas 192.168.10.0/24 key 0 ESELAB
ldap-group-verification disable
ca trust-point ESELAB
on page 132.
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
"Configuring an
53-1001858-01