Brocade Communications Systems RFS6000 System Reference Manual page 295
Provides centralized wireless lan (wlan) configuration and management
Hide thumbs
Also See for RFS6000:
- Cli reference manual (839 pages) ,
- System reference manual (553 pages)
Table of Contents
Advertisement
5. Use the Class Name field to associate an existing class, created using
6. Refer to the Pool Class Address Range field to revise an address range. A maximum of 4
7.
8. Click OK to save the new configuration and close the dialog window.
9. Click Cancel to close the dialog without committing updates to the running configuration.
Adding a new DHCP pool class
The Add DHCP Pool Class Configuration dialog is used to associate an existing class, created using
Adding a new DHCP user
used to configure a maximum of 4 pool class address range. To add a new DHCP pool class:
1. Select Services > DHCP Server from the main menu tree.
2. Select the Pool Class tab.
3. Click on the Add button from the Pool Class Names section.
4. Use the Pool Name field to define a new pool name. Enter the pool name created using
5. Use the Class Name field to associate an existing class, created using
6. The Pool Class Address Range field is used to assign address range to the class inside the
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01
user class"
on page 278.
address ranges can be assigned to a class.
a. Use the Insert button to revise the Start IP and End IP address range for a class.
b. Select a address range and click Remove to delete that particular address range.
Refer to the Status field. It displays the current state of the requests made from the applet.
Requests are any "SET/GET" operation from the applet. The Status field displays error
messages if something goes wrong in the transaction between the applet and the controller.
class, to an existing pool, created using
a new DHCP pool"
on page 264.
user class"
on page 278.
pool. A maximum of 4 address ranges can be assigned to a class.
a. Use the Insert button to enter the Start IP and End IP address range for a class.
b. Select a address range and click Remove to delete that particular address range.
DHCP server settings
"Adding a new DHCP
Adding a new DHCP
pool. It is also
"Adding a new DHCP
5
"Adding
281
Advertisement
Table of Contents
