Physical Specifications - Brocade Communications Systems RFS6000 System Reference Manual

1
Hardware overview
Access Points do not have software or firmware upon initial receipt from the factory. When the
Access Point is first powered on and cleared for the network, the controller initializes the Access
Point and installs a small firmware file automatically. Therefore, installation and firmware upgrades
are automatic and transparent.

Physical specifications

The physical dimensions and operating parameters of the Mobility RFS6000 Controller include:
Width
Height
Depth
Weight
Operating temperature
Operating humidity
The physical dimensions and operating parameters of the Mobility RFS7000 Controller include:
Width
Height
Depth
Weight
Operating temperature
Operating humidity
A power cord is not supplied with a Mobility RFS6000 Controller or Mobility RFS7000 Controller
model controller. Use only a correctly rated power cord certified for the country of operation
Power protection
To best protect the controller from unexpected power surges or other power-related problems,
ensure the controller installation meets the following guidelines:
•
•
•
2
440mm (17.32 in)
44.45mm (1.75 in)
390.8mm (15.38 in)
6.35 Kg (14 lbs)
0°C - 40°C (32°F - 104°F)
5% - 85% RH, non-condensing
440mm (17.32 in)
44.45mm (1.75 in)
390.8mm (15.38 in)
6.12 Kg (13.5 lbs)
0°C - 40°C (32°F - 104°F)
5% - 85% RH, non-condensing
If possible, use a dedicated circuit to protect data processing equipment. Commercial
electrical contractors are familiar with wiring for data processing equipment and can help with
the load balancing of dedicated circuits.
Install surge protection. Use a surge protection device between the electricity source and the
controller.
Install an Uninterruptible Power Supply (UPS). A UPS provides continuous power during a
power outage. Some UPS devices have integral surge protection. UPS equipment requires
periodic maintenance to ensure reliability.
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
.
53-1001858-01