Configuring Access Point Radio Bandwidth - Brocade Communications Systems RFS6000 System Reference Manual

Configuring access point radio bandwidth

Refer to the Bandwidth tab to view the QoS weight associated with each radio when added to a
WLAN. The weight represents the controller priority assigned to the traffic transmitted from the
radio for the WLAN.
For information on revising the weight assigned to each radio in respect to its intended operation
within its assigned WLAN, see
To view existing radio bandwidth weight settings:
1. Select Network > Access Point Radios from the main menu tree.
2. Click the Bandwidth tab.
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01
Bandwidth information displays per radio with the following data:
Index The Index is the numerical index (device identifier) used with the device radio. Use
this index (along with the radio name) to differentiate the radio from other device
radios.
Description
The displayed name is the name used with the device radio. Use this name (along
with the radio index) to differentiate the radio from other device radios.
QoS Weight Displays the Quality of Service weight for the AP. The default value for the weight is
1. AP QoS will be applied based on the QoS weight value with the higher values
given priority.
Viewing access point information
"Editing the WLAN configuration" on page 109.
4
201