Brocade Communications Systems RFS6000 System Reference Manual page 202

4
Viewing access point information
3. Check the boxes next to all the Supported Rates you want supported.
4. Click the Clear all rates button to uncheck all of the Basic and Supported rates.
5. Refer to the Status field for the current state of the requests made from applet. This field
6. Click OK to use the changes to the running configuration and close the dialog.
7.
Adding APs
The Add Radio screen provides a facility for creating a new (unique) radio index for inclusion within
the Configuration screen. Use the Add screen to add the new radio's MAC address and define its
radio type.
To add a Radio to the controller:
1. Select Network > Access Point Radios from the main menu.
2. Click the Configuration tab.
3. Click the Add button to display at screen containing settings for adding a radio
188
Basic Rates are used for management frames, broadcast traffic and multicast frames. If a rate
is selected as a basic rate it is automatically selected as a supported rate.
Supported rates allow an 802.11 network to specify the data rate it supports. When a Client
attempts to join the network, it checks the data rate used on the network. If a rate is selected
as a basic rate, it is automatically selected as a supported rate.
displays error messages if something goes wrong in the transaction between the applet and
the controller.
Click Cancel to close the dialog without committing updates to the running configuration.
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01